Aluminum Honeycomb Panels – ALA Series
Aluminum Honeycomb Panels
An all aluminum honeycomb panel featuring hexagonal aluminum honeycomb (ALH-CG) bonded to aluminum face material. Face material is commonly between .020′ and .125′ in thickness—thinner or thicker material can be substituted. The face material can be painted or powder coated prior to fabrication. We offer 20 standard colors in KYNAR 500 (PVDF), several in enamel, in conductive coat, and anodized finishes.
These honeycomb panels are fire-tested ASTM E 162, E 662 and are rated class I. (Zero flame spread, zero smoke generation.)
- 1/4″ to 6″ panel thickness
- Face sheets: mill finish, primed, anodized, painted, textured, etc.
- Cores: Commercial grade aluminum honeycomb, 3003 alloy. (5000 series available, if needed.)
ALA 1: 1/4″ cell size
ALA 2: 3/8″ cell size
ALA 3: 1/2″ cell size
ALA 4: 3/4″ cell size
Aluminum Honeycomb Mechanical Properties
|BARE psi||Stabilized psi||Mod. ksi||L psi Direction||Mod. ksi||W psi Direction||Mod. ksi|
|1/4 – 5.2||595||610||148||345||63||215||31|
|3/8 – 3.6||325||340||92||210||40||130||20|
|1/2 – 2.5||152||170||54||111||30||70||14|
|3/4 – 1.8||95||110||45||95||16||55||8|
|1 – 1.4||60||65||16||55||14||40||7|
Thickness tolerance: up to 3.00″ ± .008″; 3.001″ and up ± .060″.
IMPORTANT NOTICE: This information is believed to be reliable and to the best of our knowledge. We do not warrant the accuracy and completeness of any such information, whether expressed or implied, including warrantees of fitness for a particular purpose. It is the user’s or purchaser’s responsibility to undertake sufficient testing to verify the suitability of our products for their own purposes.
Standard Sizes: 48″ x 96″, 48″ x 120″
Custom Sizes: available to 103″ x 240″ seamless, 120″ x 240″ with seams, reinforced by doublers.
Co-Fabricated and post-fabricated edge treatments are available. Internal blocking for machining available. We offer some post-fab machining of panels and have some assembly capabilities.